Plant-based deodorizer

Plant deodorants can effectively remove sulfide atmosphere, ammonia, sulfur dioxide, methyl mercaptan, amines and other common odorous gases, and can be used to remove special odors produced in the industrial field.

PRODUCT DETAILS

Plant deodorants can effectively remove sulfide atmosphere, ammonia, sulfur dioxide, methyl mercaptan, amines and other common odorous gases, and can be used to remove special odors produced in the industrial field. This product is widely used in garbage treatment plants, sewage treatment plants, garbage transfer stations, landfills, and garbage dumps.
Plant liquid deodorant uses plant extraction technology to extract active ingredients from the roots, stems, leaves, flowers and fruits of various plants. It produces huge force under the action of high rays, improves the activity of the plant liquid, and can quickly undergo chemical reactions such as polymerization, substitution, displacement, and adsorption with various harmful and odorous molecules. The product is neutral, harmless, non-flammable, non-corrosive, and has no secondary pollution. It is an environmentally friendly product that can effectively remove waste gas, odor, and odor.

Product advantages

1. It is not restricted by temperature and other climatic environments, and will not be affected by temperature and environment so that it cannot exert its effect. It has strong weather resistance and can fully exert its deodorizing effect in high temperatures (below 50°C) and high cold (above -15°C). Whether in humid areas or dry areas, its deodorizing effect is basically not affected.
2. The deodorization speed is very fast and the absorption efficiency is high. It can be significantly deodorized in 3 minutes. It can be used for year-round, continuous odor treatment, and can also calmly deal with temporary, high-concentration odor events.
3. Spraying is very easy.

Application areas

1. Garbage rooms, garbage transfer stations, garbage transfer stations, landfills, garbage composting sites, domestic garbage, community garbage, and garbage sewage.
2. Municipal sewage, industrial sewage, sewage treatment plants, sewage pumping stations, fecal odor, biogas tanks, aeration tanks, and sludge storage areas.
3. Meat processing plants, slaughterhouses, casing factories, breeding farms, feedlots, and zoos.
4. Hospital garbage, hotel garbage, restaurant garbage, kitchen garbage, public toilets, toilets and other garbage and odor collection and distribution areas.
5. Compost plants, organic fertilizer plants, chemical plants, paint plants, paper mills, steel plants, foundries, rubber plants, food processing plants, etc.

How to use

Plant deodorants can be sprayed with high-power air cannons or with micro-spray equipment. For unorganized waste gas, spray deodorization and purification equipment can be installed.
1. Dilute the original solution of this product 200 times and spray it directly on the garbage odor source or in the livestock pen.
2. 25kg/barrel of raw solution can treat 1500-2000 square meters, or add 1kg of raw solution per ton of sewage.
3. The concentration of the deodorant liquid can be appropriately adjusted according to the source of garbage odor.

Packaging, storage and transportation and precautions

25kg/barrel; store in a cool and dry place, storage period is twelve months; pay attention to labor protection during operation, avoid contact with skin, eyes, etc., rinse with plenty of water after contact.

Packaging and shipping

​​​​​​​

ENGINEERING CASES

Wastewater Treatment Project for Small Food Factory in Haiphong, Vietnam

Wastewater Treatment Project for Small Food Factory in Haiphong, Vietnam

Medina Town Greening and Wastewater Treatment Project in Saudi Arabia

Medina Town Greening and Wastewater Treatment Project in Saudi Arabia

Wastewater Treatment Plant Upgrade Project in Remote Communities in Northern Ontario, Canada

Wastewater Treatment Plant Upgrade Project in Remote Communities in Northern Ontario, Canada

Wastewater Treatment Upgrade and Expansion Project in Kehridia, Tunisia

Wastewater Treatment Upgrade and Expansion Project in Kehridia, Tunisia

Wastewater Improvement Project in Northumberland, UK

Wastewater Improvement Project in Northumberland, UK

Wastewater Treatment Project for Rural B&B Clusters in Andalusia, Spain

Wastewater Treatment Project for Rural B&B Clusters in Andalusia, Spain

FAQ

Q: What services can we provide?

Q: What services can we provide?

A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES; Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF; Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow; Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian.
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES; Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF; Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow; Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian.
Q: Why should you buy from us not from other suppliers?

Q: Why should you buy from us not from other suppliers?

A: We are a group company with over 20 years of experience in the state-owned chemical industry.
A: We are a group company with over 20 years of experience in the state-owned chemical industry.
Q:How can we guarantee quality?

Q:How can we guarantee quality?

A:Always a pre-production sample before mass production; Always final Inspection before shipment.
A:Always a pre-production sample before mass production; Always final Inspection before shipment.
Q:Who are we?

Q:Who are we?

A:We are based in Shandong, China, start from 2021,sell to Southeast Asia(30.00%),Eastern Asia(15.00%),South Asia(10.00%),North America(10.00%),South America(10.00%),Oceania(5.00%),Central America(5.00%),Africa(5.00%),Eastern Europe(5.00%),Mid East(5.00%). There are total about 11-50 people in our office.
A:We are based in Shandong, China, start from 2021,sell to Southeast Asia(30.00%),Eastern Asia(15.00%),South Asia(10.00%),North America(10.00%),South America(10.00%),Oceania(5.00%),Central America(5.00%),Africa(5.00%),Eastern Europe(5.00%),Mid East(5.00%). There are total about 11-50 people in our office.

RELATED PRODUCTS

Methyl methacrylate, MMA

Methyl methacrylate (MMA), also known as methyl methacrylate, is an organic compound with a chemical formula of C5H8O2. It is a colorless liquid, slightly soluble in water, soluble in most organic solvents such as ethanol, and is mainly used for organic glass. Monomer, also used in the manufacture of other resins, plastics, coatings, adhesives, lubricants, sizing agents for wood and cork, paper polishes, etc.

N-Methyl-2-pyrrolidone (NMP)

N-Methyl pyrrolidone(NMP) is colourless transparent liquid, it has strong water absorption. It can almost dissolve in all the solvents(ethanol, aldehyde, ketone, aromatic hydrocarbon, etc).

Diethylene Glycol (DEG)

Diethylene glycol (DEG) is an organic compound with the formula (HOCH2CH2)2O. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, and ethylene glycol. DEG is a widely used solvent. polyurethanes, and plasticizers.It is a solvent for nitrocellulose, resins, dyes, oils, and other organic compounds. It is a humectant for cork, printing ink,

Sodium dodecylbenzenesulfonate (SDBS)

SDBS, or Sodium Dodecylbenzenesulfonate, is a white to pale yellow powder that is readily soluble in water. Possessing strong detergency, foaming, and emulsifying capabilities, it is a commonly used anionic surfactant in laundry detergents, dishwashing liquids, and industrial cleaning agents.

Ethylene Glycol

Ethylene glycol is a colorless, odorless, and viscous liquid with a sweet taste that is miscible with water. It is primarily used in the production of polyester fibers, plastics, and antifreeze, and can also serve as a solvent and lubricant; it possesses a certain degree of toxicity.

Isopropyl Alcohol (IPA)

Isopropyl alcohol is a colorless, transparent liquid with an odor similar to that of ethanol; it is volatile and flammable, and is miscible with water. It is commonly used as an industrial solvent, disinfectant, and cleaning agent, and also serves as an important raw material in organic synthesis.

Sodium sulfate

Sodium sulfate is a white crystalline solid or powder that is odorless, possesses a bitter taste, is readily soluble in water, and is chemically stable. It is primarily used in the manufacture of glass, detergents, paper, and dyes; it also serves as a laxative, a desiccant, and a chemical filler.

Citric acid

Chemicals and textiles: use citric acid or salts thereof as builders, can improve the performance of the washing product, can rapidly precipitate the metal ions, to prevent re-adhesion of pollutants on the fabric maintain washed necessary alkaline; dirt and ash dispersion and suspension; improve the performance of the surfactant.

Formic acid

Formic acid (chemical formula HCOOH, molecular formula CH2O2, molecular weight 46.03), commonly known as formic acid, is the simplest carboxylic acid.A colorless liquid with a pungent odor.Weak electrolytes, melting temperature 8.6 ℃, the boiling point of 100.8 ℃.It is highly acidic and corrosive, which can irritate the skin and cause blistering.It is found in bee, some ant and caterpillar secretions.Is an organic chemical raw material, also used as a disinfectant and preservative.

Ammonium hexafluorosilicate

Ammonium fluorosilicate (also known as ammonium hexafluorosilicate, ammonium fluosilicate or ammonium silicofluoride) has the formula (NH4)2SiF6.

Trimethylamine N-Oxide Dihydrate (TMAO)

The form of existence in nature:TMAO widely exists in nature, and is the natural contentof aquatic products, which distinguishes aquatic products from other animals.

N N-Dimethyl-p-toluidine DMPT CAS 99-97-8

This product is usually used as an accelerator, and can also be used as an additive for unsaturated polyester synthesis and adhesives.

Dioctyl adipate DOA CAS123-79-5

Dioctyl adipate is a typical cold resistant plasticizer for polyvinyl chloride, polyethylene copolymer, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber.

Silicone defoamer

Silicone defoaming agents use dimethyl silicone oil, silica, etc. as active ingredients, and are mixed with various emulsifiers.

Polyether defoamer

Polyether defoaming agent is a mixture of polyether polyols of different types obtained through special processes using different starters and epoxides such as ethylene oxide, propylene oxide, butylene oxide, etc. under the action of a catalyst.

Polyether-ester defoamer

Polyether ester defoamer is prepared on the basis of polyether defoamer by reacting with fatty acids or other organic acids.

Anionic polyacrylamide (PAM)

Anionic polyacrylamide (PAM) is a water-soluble linear polymer. Its molecular chain contains a large number of negative groups, which can quickly absorb solid particles suspended in water, bridge the particles or agglomerate the particles to form large flocs through charge neutralization.

Polyaluminum chloride (PAC)

Polyaluminum chloride is a water purification material, an inorganic polymer coagulant, also known as polyaluminum, and its English abbreviation is PAC.

Phosphorus removal agent (liquid)

Liquid phosphorus removal agent is an inorganic polymer phosphorus removal agent developed and produced by our company for domestic municipal sewage.

Aerobic bacteria

This strain can utilize proteins, a variety of sugars and starch to decompose tryptophan to form indole.

Isopropyl ether

It is easy to form peroxides, which will explode during shaking. Therefore, the peroxides produced should be treated with sodium sulfite solution before use.P -Benzyl-AminophEnol or hydroquinone are often added as stabilizers.It is miscible with ethanol and ether and slightly soluble in water.Relative density (d204)0.7258.Refractive index (n23D)1.3678.Flash point (cup) - 9 ℃.Flammable.It's stimulating.

Nonylphenol,NP nonyl phenol

Nonylphenol is an important fine chemical raw material and intermediate. It is formed by condensation of nonene and phenol in the presence of an acidic catalyst. For the preparation of synthetic detergents, humidifiers, lubricating oil additives, plasticizers and so on.

Tetrahydrofuran, THF

Tetrahydrofuran, also known as oxacyclopentane, 1, 4-epoxy butane, is a heterocyclic organic compound, chemical formula C4H8O, belongs to the ether class, is a complete hydrogenation product of furan, colorless transparent liquid, soluble in water, ethanol, ether, acetone, benzene, etc., mainly used as solvent, chemical synthesis intermediate, analytical reagent.

Diethylene Glycol Monobutyl Ether (DGBE)

Diethylene glycol monobutyl ether is a common solvent with the molecular formula C4H9OCH2CH2OCH2CH2OH. Colorless liquid with a moderate ether taste. Solubility: can be miscible with water in any proportion, soluble in alcohols, ketones, ethers, aromatic hydrocarbons, aliphatic hydrocarbons, halogenated hydrocarbons and many other organic solvents.

GET A FREE QUOTE

Apply For Discount !

24 Hours Online Service

Provide You With Free Industry Solutions

Quality Assurance

%{tishi_zhanwei}%