2-Hydroxy Phosphonoacetic Acid (HPAA)

CAS No. 23783-26-8
Molecular formula:C2H5O6P
Relative molecular mass: 156

PRODUCT DETAILS

CAS No. 23783-26-8
Molecular formula:C2H5O6P
Relative molecular mass: 156

Alias: Phosphonoglycolic acid, Hydroxyphosphonoacetic acid, Hydroxyphosphineacetic acid, HPA

Key Advantages

1. Exceptional Carbon Steel Corrosion Inhibition

HPAA delivers significantly better corrosion protection for carbon steel than conventional phosphonates such as HEDP, ATMP, and EDTMPS. It forms a dense, protective molecular film on metal surfaces.

2. Powerful Synergy with Zinc Salts

HPAA-zinc formulations achieve exceptional corrosion inhibition performance — often exceeding 90% protection rate. Widely used as the core component in high-performance all-organic cooling water treatment programs.

3. Excellent Scale Inhibition Performance

Effective against calcium carbonate, calcium sulfate, and rust scale. Provides good threshold inhibition and crystal distortion effects even at low dosing levels.

4. Moderate Chlorine Resistance

Better chlorine stability than HEDP and ATMP. Suitable for cooling water systems with moderate chlorine dosing (up to 2 ppm free residual).

5. Good High-Temperature Stability

Stable up to 180°C. Performs reliably in medium-temperature boiler water and industrial process water applications.

6. Better Environmental Profile

HPAA demonstrates improved biodegradability compared to traditional phosphonates, making it a more environmentally friendly choice for regions with strict environmental regulations.

Technical indicators

Comply with HG/T 3926-2007

Project indicator
Appearance dark brown liquid
Solid content % ≥50.0
Organophosphines (based on PO₄³⁻)% ≥25.0
Phosphoric acid (based on PO₄³⁻)% ≤1.5
Phosphorous acid (calculated as PO₃³⁻)% ≤3.0
Density (20℃)g/cm³ ≥1.3
pH value (10g/L aqueous solution) ≤3.0

Applications

Industrial Cooling Water Systems (Corrosion-Focused)

The primary application — HPAA is specifically chosen for cooling water systems where carbon steel corrosion control is the top priority. Ideal for power plants, refineries, and chemical plants with steel piping and heat exchangers.

High-Performance All-Organic Treatment Programs

Used as the base component in formulated all-organic cooling water programs, combined with polymers, zinc salts, and copper corrosion inhibitors for comprehensive protection.

Boiler Water Treatment

Suitable for medium-pressure boiler systems as an internal treatment chemical for both scale inhibition and corrosion protection of boiler tubes.

Oilfield Water Injection & Pipelines

Applied in oilfield produced water gathering systems and injection wells. Provides both scale control and corrosion inhibition for carbon steel pipelines and downhole equipment.

Metal Surface Treatment & Cleaning

Used as a metal pretreatment agent in industrial cleaning, rust removal, and pre-painting treatment formulations.

Reverse Osmosis (RO) Systems

Effective RO antiscalant, particularly valued in systems where corrosion protection of pre-treatment equipment is also a concern.

How It Works

1. Protective Film Formation

HPAA molecules adsorb onto carbon steel surfaces through both the phosphonate and carboxylate groups, forming a dense, adherent protective film that blocks corrosive species from reaching the metal surface.

2. Threshold Scale Inhibition

At sub-stoichiometric doses, HPAA interferes with calcium carbonate and calcium sulfate crystal growth, preventing scale deposition on heat transfer surfaces.

3. Zinc Ion Stabilization

HPAA acts as an excellent zinc stabilizer, preventing zinc precipitation at alkaline pH levels. This allows zinc-based corrosion inhibition programs to operate effectively at higher cycles of concentration.

Packaging and shipping

ENGINEERING CASES

Wastewater Treatment Project for Small Food Factory in Haiphong, Vietnam

Wastewater Treatment Project for Small Food Factory in Haiphong, Vietnam

Medina Town Greening and Wastewater Treatment Project in Saudi Arabia

Medina Town Greening and Wastewater Treatment Project in Saudi Arabia

Wastewater Treatment Plant Upgrade Project in Remote Communities in Northern Ontario, Canada

Wastewater Treatment Plant Upgrade Project in Remote Communities in Northern Ontario, Canada

Wastewater Treatment Upgrade and Expansion Project in Kehridia, Tunisia

Wastewater Treatment Upgrade and Expansion Project in Kehridia, Tunisia

Wastewater Improvement Project in Northumberland, UK

Wastewater Improvement Project in Northumberland, UK

Wastewater Treatment Project for Rural B&B Clusters in Andalusia, Spain

Wastewater Treatment Project for Rural B&B Clusters in Andalusia, Spain

FAQ

Q: What services can we provide?

Q: What services can we provide?

A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES; Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF; Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow; Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian.
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES; Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF; Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow; Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian.
Q: Why should you buy from us not from other suppliers?

Q: Why should you buy from us not from other suppliers?

A: We are a group company with over 20 years of experience in the state-owned chemical industry.
A: We are a group company with over 20 years of experience in the state-owned chemical industry.
Q:How can we guarantee quality?

Q:How can we guarantee quality?

A:Always a pre-production sample before mass production; Always final Inspection before shipment.
A:Always a pre-production sample before mass production; Always final Inspection before shipment.
Q:Who are we?

Q:Who are we?

A:We are based in Shandong, China, start from 2021,sell to Southeast Asia(30.00%),Eastern Asia(15.00%),South Asia(10.00%),North America(10.00%),South America(10.00%),Oceania(5.00%),Central America(5.00%),Africa(5.00%),Eastern Europe(5.00%),Mid East(5.00%). There are total about 11-50 people in our office.
A:We are based in Shandong, China, start from 2021,sell to Southeast Asia(30.00%),Eastern Asia(15.00%),South Asia(10.00%),North America(10.00%),South America(10.00%),Oceania(5.00%),Central America(5.00%),Africa(5.00%),Eastern Europe(5.00%),Mid East(5.00%). There are total about 11-50 people in our office.

RELATED PRODUCTS

Methyl methacrylate, MMA

Methyl methacrylate (MMA), also known as methyl methacrylate, is an organic compound with a chemical formula of C5H8O2. It is a colorless liquid, slightly soluble in water, soluble in most organic solvents such as ethanol, and is mainly used for organic glass. Monomer, also used in the manufacture of other resins, plastics, coatings, adhesives, lubricants, sizing agents for wood and cork, paper polishes, etc.

N-Methyl-2-pyrrolidone (NMP)

N-Methyl pyrrolidone(NMP) is colourless transparent liquid, it has strong water absorption. It can almost dissolve in all the solvents(ethanol, aldehyde, ketone, aromatic hydrocarbon, etc).

Diethylene Glycol (DEG)

Diethylene glycol (DEG) is an organic compound with the formula (HOCH2CH2)2O. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, and ethylene glycol. DEG is a widely used solvent. polyurethanes, and plasticizers.It is a solvent for nitrocellulose, resins, dyes, oils, and other organic compounds. It is a humectant for cork, printing ink,

Sodium dodecylbenzenesulfonate (SDBS)

SDBS, or Sodium Dodecylbenzenesulfonate, is a white to pale yellow powder that is readily soluble in water. Possessing strong detergency, foaming, and emulsifying capabilities, it is a commonly used anionic surfactant in laundry detergents, dishwashing liquids, and industrial cleaning agents.

Ethylene Glycol

Ethylene glycol is a colorless, odorless, and viscous liquid with a sweet taste that is miscible with water. It is primarily used in the production of polyester fibers, plastics, and antifreeze, and can also serve as a solvent and lubricant; it possesses a certain degree of toxicity.

Isopropyl Alcohol (IPA)

Isopropyl alcohol is a colorless, transparent liquid with an odor similar to that of ethanol; it is volatile and flammable, and is miscible with water. It is commonly used as an industrial solvent, disinfectant, and cleaning agent, and also serves as an important raw material in organic synthesis.

Sodium sulfate

Sodium sulfate is a white crystalline solid or powder that is odorless, possesses a bitter taste, is readily soluble in water, and is chemically stable. It is primarily used in the manufacture of glass, detergents, paper, and dyes; it also serves as a laxative, a desiccant, and a chemical filler.

Citric acid

Chemicals and textiles: use citric acid or salts thereof as builders, can improve the performance of the washing product, can rapidly precipitate the metal ions, to prevent re-adhesion of pollutants on the fabric maintain washed necessary alkaline; dirt and ash dispersion and suspension; improve the performance of the surfactant.

Formic acid

Formic acid (chemical formula HCOOH, molecular formula CH2O2, molecular weight 46.03), commonly known as formic acid, is the simplest carboxylic acid.A colorless liquid with a pungent odor.Weak electrolytes, melting temperature 8.6 ℃, the boiling point of 100.8 ℃.It is highly acidic and corrosive, which can irritate the skin and cause blistering.It is found in bee, some ant and caterpillar secretions.Is an organic chemical raw material, also used as a disinfectant and preservative.

Ammonium hexafluorosilicate

Ammonium fluorosilicate (also known as ammonium hexafluorosilicate, ammonium fluosilicate or ammonium silicofluoride) has the formula (NH4)2SiF6.

Trimethylamine N-Oxide Dihydrate (TMAO)

The form of existence in nature:TMAO widely exists in nature, and is the natural contentof aquatic products, which distinguishes aquatic products from other animals.

N N-Dimethyl-p-toluidine DMPT CAS 99-97-8

This product is usually used as an accelerator, and can also be used as an additive for unsaturated polyester synthesis and adhesives.

Dioctyl adipate DOA CAS123-79-5

Dioctyl adipate is a typical cold resistant plasticizer for polyvinyl chloride, polyethylene copolymer, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber.

Silicone defoamer

Silicone defoaming agents use dimethyl silicone oil, silica, etc. as active ingredients, and are mixed with various emulsifiers.

Polyether defoamer

Polyether defoaming agent is a mixture of polyether polyols of different types obtained through special processes using different starters and epoxides such as ethylene oxide, propylene oxide, butylene oxide, etc. under the action of a catalyst.

Polyether-ester defoamer

Polyether ester defoamer is prepared on the basis of polyether defoamer by reacting with fatty acids or other organic acids.

Anionic polyacrylamide (PAM)

Anionic polyacrylamide (PAM) is a water-soluble linear polymer. Its molecular chain contains a large number of negative groups, which can quickly absorb solid particles suspended in water, bridge the particles or agglomerate the particles to form large flocs through charge neutralization.

Polyaluminum chloride (PAC)

Polyaluminum chloride is a water purification material, an inorganic polymer coagulant, also known as polyaluminum, and its English abbreviation is PAC.

Phosphorus removal agent (liquid)

Liquid phosphorus removal agent is an inorganic polymer phosphorus removal agent developed and produced by our company for domestic municipal sewage.

Aerobic bacteria

This strain can utilize proteins, a variety of sugars and starch to decompose tryptophan to form indole.

Isopropyl ether

It is easy to form peroxides, which will explode during shaking. Therefore, the peroxides produced should be treated with sodium sulfite solution before use.P -Benzyl-AminophEnol or hydroquinone are often added as stabilizers.It is miscible with ethanol and ether and slightly soluble in water.Relative density (d204)0.7258.Refractive index (n23D)1.3678.Flash point (cup) - 9 ℃.Flammable.It's stimulating.

Nonylphenol,NP nonyl phenol

Nonylphenol is an important fine chemical raw material and intermediate. It is formed by condensation of nonene and phenol in the presence of an acidic catalyst. For the preparation of synthetic detergents, humidifiers, lubricating oil additives, plasticizers and so on.

Tetrahydrofuran, THF

Tetrahydrofuran, also known as oxacyclopentane, 1, 4-epoxy butane, is a heterocyclic organic compound, chemical formula C4H8O, belongs to the ether class, is a complete hydrogenation product of furan, colorless transparent liquid, soluble in water, ethanol, ether, acetone, benzene, etc., mainly used as solvent, chemical synthesis intermediate, analytical reagent.

Diethylene Glycol Monobutyl Ether (DGBE)

Diethylene glycol monobutyl ether is a common solvent with the molecular formula C4H9OCH2CH2OCH2CH2OH. Colorless liquid with a moderate ether taste. Solubility: can be miscible with water in any proportion, soluble in alcohols, ketones, ethers, aromatic hydrocarbons, aliphatic hydrocarbons, halogenated hydrocarbons and many other organic solvents.

GET A FREE QUOTE

Apply For Discount !

24 Hours Online Service

Provide You With Free Industry Solutions

Quality Assurance

%{tishi_zhanwei}%